Tips and tricks

- At the top of the main-menu and every folder, the keys 1 to 9 are shortcuts to the icons 1-9

- A shortcut on the left menukey in standby-mode will take more time to open than a shortcut on the right menukey. Reason: The left key is also used for the keylock so it shortly waits for pressing the * button.

- While writing text press and hold "#" to switch between Alpha mode and Number mode. You can also press a key long to insert its number.

- In standby-mode, press and hold 0 to launch your wap home page.

- If you have your keylock activated just press the on/off button to turn on your backlight to look at the time when it's dark without having to unlock the keypad.

- To keep the backlight on, run Torch (freeware), press and hold the Menu button and go somewhere else on the phone.

- To check your current firmware version simply type *#0000# in standby screen.

- To check your IMEI (International Mobile Equipment Identity) type *#06# in standby screen.

- To check your Bluetooth device address type *#2820# in standby screen.

- Start up in Safe Mode (no 'auto start' apps will be running): Hold down the pencil key when you turn on the phone and hold it on until you have to enter your PIN code.

- Format the phone memory by typing *#7370# in standby screen.

- In standby mode,
45# + dials the number on your sim in memory slot 45.
50# + dials slot 50 and so on.
.................................................. .................................................. .................................................. ........

*# 06 # Seriennummer/IMEI indicates (actually also a GSM is code - see further below)
-----------------------------------------------------
*# 0000 # SW version announcements (e.g. V3.42.1, 16-10-03, Nhl-10)
---------------------------------------------------------
*# 2820 # Bluetooth (BT) device address indicate
------------------------------------------------------------
xx # Directory quick access (xx = storage location and afterwards lozenge e.g. 24 #)
---------------------------------------------------
A/from key Short pressing for menu for switching between profiles
-------------------------------------------------------------------
Menu key Long pressing for "task manager" - switching between active programs (with "C" key programs can be terminated.)
------------------------------------------------------------------
Menu quick access Over in the menu e.g. to point 3.1 arrive simply 31 enter (if the third symbol a file is opened is for these and then in it started the first Programm/Icon).
---------------------------------------------------------------------
Autostart go around When switching on of the Handys on to the pin inquiry the key "ABC" (pin) comes the whole time keeps pressed - this is to ignore (allegedly) the autoinitialization programs.
------------------------------------------------------------------------
# Do not switch between different lines (AS)... goes e.g. with Austrian ONE Handys (see nose cunning). I could not try out however also, since I did not have 2 lines on the SIM map.
-------------------------------------------------------------------------
12345 ... is according to standard set the Nokia nokia-Sicherheitscode.
--------------------------------------------------------------------
0000 ... is according to standard those (with Vodafone windshield frame section) set 2te pin and that standard net code/password
With D1 the standard net code is the last 4 numbers of the card number without HLR e.g. 99999234-5/55 - > 2345
------------------------------------------------------------------------
0 - for a long time press If one the "0" in the main menue for a long time presses those homepage of the standard WAP connection is called.
------------------------------------------------------

Your files in MMC are stored in multiple (disk) blocks.
So if you format using 16K block, the space used will be 16K eventhough your file is just 1K.

If you buy MMC, it is usually preformatted with 16K block. Therefore alot of space is wasted as most installed program files are usually less than 2K.

You will need a card reader to do this:-

1. Connect card reader and copy all your files in the MMC to computer disk.
(Make sure you set the show all/hidden/os files to "on")
2. Do a format of the MMC using command line "format" and use the /A=size option.
Alternative, you can use the Disk Management in Adminstrative Tools to format.
Make sure you select FAT. For 256MB MMC, smallest block you can use is 4K, 128MB is 2K, 64Mb is 1K and 32MB is 512B.

(Note: You cannot use the phone "format MMC" to do this as the format just clear the allocation table and does not change the block size)

3. Copy back all files to MMC.

Now you will find that you will have more space.
256mb MMC got back 30+ mbs